CAN / CANopen Seminar on Dec. 7-9, 2010.

IXXAT, Inc. will be conducting a three day seminar providing a detailed look into Controller Area Network (CAN) analysis, testing, monitoring and troubleshooting plus an introduction to CANopen.

Unlike conventional CAN training seminars, IXXAT utilizes small class sizes and ensures that each participant obtains a working knowledge of CAN recommended methods and practices.
The seminar will consist of three separate training sessions:

(I) Introduction to CAN,
(II) CAN Network Analysis and
(III) Introduction to CANopen.

read more…

New Consortium Speeds IEEE 1588 Testing

The University of New Hampshire InterOperability Laboratory (UNH-IOL), an independent provider of broad-based testing and standards conformance services for the networking industry, announced that the organization will host an industry plugfest, providing participants the opportunity to perform interoperability testing of devices in compliance with the Precision Time Protocol IEEE 1588-2008 standard. The Precision Time Protocol Interoperability plugfest, which will take place September 27 – September 29 at the UNH-IOL’s 32,000+ square foot facility in Durham, N.H., will be held in association with the 2010 International IEEE Symposium on Precision Clock Synchronization (ISPCS) for Measurement, Control and Communication. The Symposium immediately follows the plugfest on September 29 – October 1 in Portsmouth, N.H., and is a forum for researchers and practitioners from industry, academia, and government involved in the area of Precision Clock Synchronization.

read more…

IXXAT, Inc. to host a three day CAN Troubleshooting Seminar at its Bedford, NH offices, near the Manchester airport.

IXXAT, Inc. will be conducting a three day seminar providing a detailed look into Controller Area Network (CAN) analysis, testing, monitoring and troubleshooting. Unlike traditional training seminars, IXXAT utilizes small class sizes and lab demonstrations to insure that each participant obtains a working knowledge of CAN recommended methods and practices.

The seminar will be held April 27-29, 2010. Six seats are available on a first-come first-serve basis at a cost of $1,500 per attendee. For further information please call 603-471-0800 x101.

IXXAT, Inc. to host a three day CAN and CANopen Training Seminar at its Bedford, NH offices, near the Manchester airport.

IXXAT, Inc. will be conducting a three day introduction into Controller Area Network (CAN) and CANopen. Unlike traditional CAN and CANopen training seminars, IXXAT utilizes small class sizes and lab demonstrations to insure that seminar participants obtain a working knowledge of CAN and CANopen technology.

The seminar will be held April 20-22, 2010. Six seats are available on a first-come first-serve basis at a cost of $1,500 per attendee. For further information please call 603-471-0800 x101.

Introduction, Protocols and Implementation

With the new one-day real-time Ethernet seminar IXXAT presents a topical theme and enables de-velopers and decision makers to get a quick overview of the important currently available pro-tocols as well as the specific features and char-acteristics at the implementation.

During the seminar, the protocols EtherNet/IP, Profinet RT & IRT, POWERLINK, EtherCAT, and SERCOS III are introduced. Besides functional criteria, e.g. the level of real-time capability, modeling of process and parameter data as well as data transmission functions, also implementa-tion options, extendability, flexibility and popularity are discussed.

read more…

With its new “CAN network analysis seminar”, IXXAT now offers a one-day training specially intended for developers of CAN devices and service engineers.

The seminar provides an overview about possibilities and procedures for the successful analysis of CAN bus systems. This includes analysis of the communication level, e.g. for CAN device or network software development, as well as testing on physical level, e.g. for design and commissioning of CAN networks.
In addition, procedures for systematic and successful troubleshooting and elimination of existing distortion and error sources are explained in detail and presented using practical examples.
The protocol independent approach makes the seminar also interesting for CANopen, DeviceNet and SAE J1939 users.

read more…

Seminar dates in March

The seminars offered by IXXAT provide a quick and detailed introduction to current communication technologies.
The seminars are aimed primarily at developers and system designers who have to implement their own developments and want to acquire substantial basic knowledge of the technologies. However, they are also suitable for decision-makers who want to learn about the potential of the technologies.

read more…

IXXAT will present its CAN and FlexRay products on the testing expo from Mai 6. to 9., 2008. A special highlight in 2008 is the residual bus simulation for FlexRay and CAN systems, based on the MultibusAnalyser and the FlexRay CCM.
We would be pleased to welcome you at our booth. The IXXAT booth number is 1164.