CANopen Protocol Software V4.21

Extension of the supported target platforms

The CANopen protocol software from IXXAT, which has been available for many years and has proven itself in numerous applications, is now also available for the following target systems:

• Linux Kernel 2.6 with SocketCAN driver and GNU C development environment for Freescale MPC 5200B with internal MSCAN Rev 2.1 or x86 based PCs with passive IXXAT CAN interface modules (CANopenRT)

• Infineon XE16x with internal MultiCAN for Keil C166 V6

• STMicroelectronics STM32 (STM32F103) with internal bxCAN for Keil ARM (Real-View) µVision III and IAR Embedded Workbench

The CANopen protocol software conforms to the CANopen specification CiA 301 Version 4.02 and is available as Slave software and as Master/Slave software.
Adapted software packages are already available for a large number of microcontrollers.
Support for not yet supported microcontrollers can be implemented on request.
For further information about the CANopen Protocol Software and the supported targets please have a look on the IXXAT webpage.

[Software information]          [List of supported targets]