Products

CAN-Ethernet Gateway
In the gateway mode the CAN@net II/Generic is connected to a PC or to a controller platform via TCP/IP. The application program on the host communicates via a standard TCP/IP socket and uses a simple ASCII protocol. As CAN-Ethernet Gateway, the CAN@net II/Generic offers simple, flexible access to CAN systems via a LAN or via the Internet.

CAN-Ethernet-CAN Bridge
Using two CAN@net II/Generic, a CAN-Ethernet-CAN bridge can be implemented. This bridge allows the exchange of CAN messages between two CAN systems via TCP/IP where filter tables can be defined.

Configuration and firmware update
The configuration of the TCP/IP parameters can be performed using a PC tool with automatic device detection. The configuration of the bridge functionality and the CAN communication is supported by an implemented webserver.

Technical Data

PC bus interface	10/100 Mbit/s Ethernet (10Base-T/100Base-T), Autodetect, RJ45 connector
IP address allocation	DHCP, via PC tool
Microcontroller	Freescale MCF5235, 150 MHz
Memory extension	8 Mbyte DRAM, 4 Mbyte Flash
CAN controller	SJA1000
CAN bus interface	ISO 11898-2, Sub D9 galvanically decoupled (500V)
Current supply	9-32 V DC, 3 W
Temperature range	-20 ºC ... +70 ºC
Certification	CE, FCC, CSA
Housing	Plastic housing for top hat rail mounting
Size	approx. 22,5 x 100 x 115 mm

Contents of delivery
- CAN@net II/Generic
- User manual
- Sample programs

Order number

1.01.0086.10201

CAN@net II/Generic; one CAN channel

Products

Webshop

Product Information

Further Products

CAN@net/VCI

News

Gateways/Bridges

CAN@net II/Generic - CAN/Ethernet Gateway

CAN-Ethernet Gateway andCAN-Ethernet-CAN Bridge

CAN-Ethernet Gateway and
CAN-Ethernet-CAN Bridge