|
|
CANblue/Generic
CAN-Bluetooth-CAN Bridge and
CAN-Bluetooth Module with ASCII Protocol
 Bridge Mode
The bridge mode allows the user to set-up a CAN-Bluetooth-CAN bridge by using two CANblue/Generic devices. Message exchange occurs on layer 2 and is transparent. The device can also be used in systems with CANopen, DeviceNet or customer-specific protocols. Filters can be set for data exchange via Bluetooth. By using more than two CANblue/Generic devices the coupling of the devices can be made dynamically. Depending upon the existing environmental conditions, the maximum distance between the devices is up to 100m.
ASCII Protocol Mode
In this mode, functions for transmitting and receiving CAN messages and for configuring the CANblue/Generic are available to the user based on simple ASCII commands. The CANblue/Generic is ideal for "non-Windows" systems or embedded platforms.
|
Technical Data | Bluetooth interface | Bluetooth specification V2.0, Class 1 / +16,9 dBm (49 mW), 100m | | Microcontroller | Infineon C161U, 36 MHz | | Memory | 256 k Flash, 128 k RAM | | CAN controller | SJA1000 | | CAN bus interface | ISO 11898-2 and ISO/IS11898-3, switchable, Sub D9 plug according to DS102, galv. decoupled | | Voltage supply | 9 - 30 V DC, 2.5 W | | Temperature range | -20 ºC ... +70 ºC | Certification | CE, FCC | | Housing | stable metal housing | | Size | 85 x 72 x 35 mm |
|
Contents of delivery
- CANblue/Generic, manual
Order number
| 1.01.0125.00001 |
CANblue/Generic | |
|
|
CANblue
PC interface with VCI driver for Windows. |
|
)
