Language 
SitemapSitemap
  Home     About IXXAT     Products     Engineering     Training     Know-How     News     Contact     Support  
Download
 
canAnalyser/MultibusAnalyser Update
Version 2.5.10.1273 (or higher) to Version 2.5.14.1488
Download/Link
Date March 28, 2007
canAnalyser patch
(EXE: 8.5 MB)

 
canAnalyser-lite patch
(EXE: 6.8 MB)

 
MBAnalyser patch
(EXE: 8.3 MB)

 
Description The patch file will fix some known bugs of the release version 2.5.10.1273 and extends the functionality by two new modules:

Replay Module:
The Replay Module allows to transmit recorded trace files on the CAN bus and to other modules.

Offline Device:
The Offline Device describes a simulated hardware device with two CAN and one FlexRay (for MultibusAnalyser) controllers. It allows to run the Analyser even if no hardware devices is installed.

Please note: For an error free operation of the canAnalyser the CodeMeter Runtime Kit Update must be installed: http://wibu.com/download_user.php

canAnalyser Update - Version 2.0 to Version 2.4 Download/Link
Date Juli 13, 2005
Update for
canAnalyser lite
(EXE: 4,5 MB)

 
Update for
canAnalyser Standard
(EXE: 4,7 MB)

 
Programming Add-on for
canAnalyser Standard
(EXE: 903 kB)

 
Description Free update for the canAnalyser 2.0. Updates the canAnalyser to version 2.4.

Changings:
- Cyclic transmission support for all CAN interfaces
- Global filter settings
- Extended trace functionality
- Low-speed support (tinCAN161, USB-to-CAN II)
- General bug fixes

Additional programming add-on
for the standard version:

- Scripting-Host functionality
- .NET API

Please note: An update from version 2.x to version 2.5, which has to be purchased separately, is already available. The new features are listed on the following page: http://www.ixxat.de/cananalyser_support_en.html

canAnalyser/32 update, from version 1.80 to version 1.82 Download/Link
Version [information not available]
Patch file canAnalyser/32-pro
V 1.8
(EXE: 9.4 MB)

 
Patch file canAnalyser/32-lite
V 1.8
(EXE: 7.6 MB)

 
Description By using the patch file the canAnalyser/32 can be updated from version 1.80 to version 1.82. The version 1.82 provides several bug fixes and improvements for the version 1.80.

Changes:

1.) From version 1.82 of canAnalyser/32 board selection is done by simply selecting a previously installed IXXAT CAN interface. Knowledge of hardware parameters like address and irq is no longer required here.

2.) Alternatively you can work with the second CAN controller of an IXXAT CAN interface (if existing).

3.) canAnalyser/32 V1.82 supports CAN@net and USB-to-CAN compact.

Please note: It is only allowed to install the patch file on systems with an already installed version 1.80 of the canAnalyser/32. An installation of the patch file on systems with any other version of the canAnalyser/32 will damage the installed canAnalyser/32.

Symbolic Name Editor for canAnalyser Download/Link
Version 1.0
Symbolic Name Editor
(ZIP: 700 kB)

 
Description The Symbolic Name Editor allows to edit the identifier names of the canAnalyser/32 and the conversion to the new canAnalyser V2 format.

Copyright © 2004-2008 - IXXAT Automation GmbH. All rights reserved. [Imprint] [Login] [Privacy Policy]