FRC-EP150
PC interface for FlexRay and CAN
| Product status |
Available End of 2008 | |
 The FRC-EP150 is functional compatible to the FlexRay CCM, except for the four CAN interfaces. Due to this, the device is specially suited for FlexRay/CAN gateway applications where higher data amounts have to be transferred or for the connection of multiple, different CAN systems to FlexRay.
For further information about the general device functionality please refer to the product FlexRay CCM.
Technical Data
FlexRay 2 x 10 Mbit/s
FlexRay protocol chip: Freescale MFR4310
Analysis of the FlexRay start-up behavior (asynchronous analysis mode)
FlexRay interface: Philips TJA 1080
4 x CAN interface
- 2 x ISO/IS 11898-2 and 11898-3, switchable via software
- 2 x ISO/IS 11898-2
Connection to PC with Fast Ethernet 10/100 Mbit/s
4 trigger outputs, 2 trigger inputs
MPC 866 microcontroller system with 130 MHz
64 Mbyte RAM, 32 Mbyte Flash
Power supply with 6.5 to 50 V DC
Temperature range -40 ... +70 ºC
Contents of delivery
- FRC-EP150
- Power cable
- Ethernet cable
- Driver CD
- Manual
Order number
| 1.01.0102.00011 |
FRC-EP150 |
| 1.01.0102.00014 |
FRC-EP150 [MFR4310 Dual Chip] |
| 1.01.0101.00012 |
Dual Chip MFR 4310 Extension Kit | |
|
)
