)
The FlexRay CCM is a powerful FlexRay/CAN platform for both PC-based and stand-alone applications. As an open PC interface, it is measuring hardware for comprehensive analysis and simulation tasks for FlexRay and CAN networks. An exact local time enables synchronous logging of FlexRay and CAN messages. The FlexRay analysis is carried out both via the FlexRay protocol module and via an asynchronous bit stream analysis, so that both the start-up behavior and specific errors on the FlexRay bus can be detected.
The powerful micro-controller system (MPC 866, 130 MHz) allows real-time-critical tasks to be performed directly on the hardware in the form of add-on software modules. In this way, real-time rest bus simulations, protocol implementations or emulation functions can be implemented.
The FlexRay CCM can also be used as an autonomous device, which enables use as a FlexRay/CAN gateway, for example.
The interface communicates via Fast Ethernet TCP/IP (10/100 Mbit/s) and is designed for processing of 100 % bus load on all bus systems.
The interface is connected to FlexRay via the current version of the FlexRay chip (Freescale MFR 4310). Upgrading to new chip generations can be carried out with plug-in modules.
In addition to two 10 Mbit/s FlexRay channels, the interface has two CAN interfaces (ISO/IS 11898-2 high-speed CAN und ISO/IS 11898-3 low-speed CAN).
To control external hardware components, the interface has four trigger outputs, which can be controlled via FlexRay messages or by the FlexRay cycle. In addition, two trigger inputs are available.
The scope of supply of the FlexRay interface includes a driver that provides functions for configuration as well as receiving and transmitting FlexRay and CAN messages. Own PC applications can be easily developed on the basis of the driver.
Dual chip extension
With the dual chip extension, two FlexRay cold starters can be implemented with one hardware platform. Thus the device can also start FlexRay networks containing integration nodes only.
Embedded programming extension
An extension package enables the implementation of own software components on the Embedded FlexRay CCM hardware. Thus the implementation of transport protocols, real-time simulations or gateway solutions is possible.
Technical Data
| 1.01.0100.00011 | FlexRay CCM |
| 1.01.0100.00014 | FlexRay CCM [MFR4310 Dual Chip] |
| 1.01.0100.00016 | FlexRay CCM-E [Stackable Case] |
| 1.01.0101.00012 | Dual Chip MFR 4310 Extension Kit |