|
|
PC-I 04/104
Passive CAN interface for PC/104 bus systems
This is a passive CAN board (no microprocessor on board) for the PC/104 bus with up to two CAN channels. It represents a very economic solution for connecting a PC to a CAN network in applications where there are low performance requirements.
|
Technical Data | PC bus interface | PC/104 bus, 8 bit | | PC address range | C000h-FFC0h (memory mapped), adjustable in 1 kB steps | | Interrupts | IRQ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15 separated for each CAN controller, shared interrupt, edge/level mode | | Microcontroller | None | | CAN controller | Up to two Philips SJA 1000 | | CAN bus interface | ISO/IS 11898-2, bent 2 x 5 pin connectors according to DS 102, optional galvanic decoupling | | Power supply | 5 V DC, 150 mA typ., provided by PC | | Temperature range | -20 ºC ... +70 ºC | | Certification | CE, CSA/UL | | Size | Approx. 90 x 96 mm |
|
Order options - Galvanic decoupling
Contents of delivery - PC/CAN interface card and manual - CAN driver VCI for Windows 2000, XP - Simple CAN monitor "miniMon" Order number
| 1.01.0070.10100 |
PC-I 04/104, 1 x SJA1000 CAN controller, 1 x CAN interface |
| 1.01.0070.10200 |
PC-I 04/104, 1 x SJA1000 CAN controller, 1 x CAN interface, 1 x galvanic decoupled |
| 1.01.0070.11110 |
PC-I 04/104, 2 x SJA1000 CAN controller, 2 x CAN interface |
| 1.01.0070.11220 |
PC-I 04/104, 2 x SJA1000 CAN controller, 2 x CAN interface, 2 x galvanic decoupled | |
|
|
CAN Driver for Windows The VCI driver allows to set-up own applications or to use the board in combination with IXXAT´s tool suite. |
CAN Driver for Linux Free driver for the operation of the interface under Linux. |
canAnalyser Powerful analyzing tool to record, interprete and transmit CAN messages. |
|