| ETHERNET Powerlink interfaces for PCI and cPCI systems |
Download/Link |
| Date |
December 2005 |
Word2000
(DOC: 40 kB)
Picture
(JPG: 960 kB)
|
| Content |
IXXAT is the first vendor worldwide to offer a PCI and cPCI card for ETHERNET Powerlink. The cards can be operated as a managing node (MN) and a controlled node (CN) and among other things enable simple implementation of real-time-compatible PC-based PLC applications for ETHERNET Powerlink. The cards also serve as a platform for PC-based analysis and test systems... |
|
| CAN@net II – multi-functional CAN/Ethernet gateway |
Download/Link |
| Date |
December 2005 |
Word2000
(DOC: 40 kB)
Picture
(JPG: 1,3 MB)
|
| Content |
The new CAN@net II is a universal CAN/Ethernet gateway that covers various applications.The standard variant CANnet II/VCI enables connection of CAN networks to Windows PCs via Ethernet. The customer’s application is connected to the CAN@net II via the VCI (Virtual CAN Interface) driver library included in the scope of supply. Due to its uniform application interface, the VCI driver library makes it possible to change to another interfaces, such as PCI, PCMCIA, USB and Bluetooth, without adapting the software. As the VCI accesses the TCP/IP protocol of Windows internally, the CAN@net II can be used as a standard IP component and addressed both via local networks and via the Internet... |
|
| CANcheck - installation tester for CAN networks |
Download/Link |
| Date |
December 2005 |
Word2000
(DOC: 37 kB)
Picture
(JPG: 325 kB)
|
| Content |
CANcheck allows a simple test of CAN networks during start-up, troubleshooting and maintenance. The battery-operated hand-held device is connected to the CAN network to be tested and operated via cursor keys and a graphic LCD display. The test results can be output via the LCD display or via a PC connected via a USB port... |
|
| Seminars in Q1 2006 |
Download/Link |
| Date |
December 2005 |
Word2000
(DOC: 37 kB)
|
| Content |
CAN, CANopen, DeviceNet, EtherNet/IP and ETHERNET Powerlink
The seminars offered by IXXAT provide a quick and easy introduction to current communication technologies.
The seminars are aimed primarily at developers and system designers who have to implement their own developments and want to acquire sound basic knowledge of the technologies. However, they are also suitable for decision-makers who want to learn about the potential of the technologies... |
|
| CANopenRT – protocol software for CANopen real-time applications |
Download/Link |
| Date |
September 2005 |
Word2000
(DOC: 36 kB)
|
| Content |
The CANopenRT software from IXXAT is a well thought-out protocol software package for the implementation of slave or master devices in accordance with the CANopen specification DS301, version 4.0.2.The software is specially designed for implementations where a real-time operating system is used. All operating system functions are abstracted by virtual operating system calls, which are compiled in a central module. The CANopenRT software can thus be simply adapted to various operating systems... |
|
| ETHERNET Powerlink PCI interface card |
Download/Link |
| Date |
August 2005 |
Word2000
(DOC: 37 kB)
|
| Content |
IXXAT is the first vendor worldwide to offer a PCI card for ETHERNET Powerlink V2. The card can be operated as a managing node (MN) and a controlled node (CN) and among other things enable simple implementation of real-time-compatible PC-based SPS applications for ETHERNET Powerlink. The card also serves as a platform for PC-based analysis and test systems... |
|
| CANcorder MMC with extended scope of functions |
Download/Link |
| Date |
August 2005 |
Word2000
(DOC: 930 kB)
Picture
(JPG: 880 kB)
|
| Content |
The CANcorder MMC from IXXAT is a universal stand-alone data logger for diagnostics of CAN systems and recording operating data. Through new functions, for transmission of cyclic messages and "continuous trace", the CANcorder MMC has been adapted further to requirements in the area of diagnostics and service... |
|
| DeviceNet extension for canAnalyser |
Download/Link |
| Date |
August 2005 |
Word2000
(DOC: 530 kB)
Picture
(JPG: 500 kB)
|
| Content |
The new DeviceNet module from IXXAT is an add-on for the canAnalyser that allows interpretation of CAN messages in accordance with the ODVA DeviceNet standard. All messages are sorted according to their DeviceNet importance and displayed with message group, message ID and MAC ID. The message content is decoded according to type and displayed clearly in plaintext... |
|
| SAE J1939 protocol software for 8-bit target systems |
Download/Link |
| Date |
June 2005 |
Word2000
(DOC: 36 kB)
|
| Content |
The SAE J1939 protocol software from IXXAT provides all communication mechanisms defined in the SAE J1939 specification and therefore enables the quick and easy development of SAE J1939 devices... |
|
| IEEE 1588 PTP protocol software |
Download/Link |
| Date |
June 2005 |
Word2000
(DOC: 36 kB)
|
| Content |
The IEEE 1588 standard, also known as "Precision Clock Synchronisation Protocol for Networked Measurement and Control Systems", defines a procedure with which several spatially distributed real-time clocks can be synchronized, which are connected with each other via a "package-compatible" network (normally Ethernet).With the IEEE 1588 protocol software from IXXAT, IEEE 1588 compliant embedded devices can be developed quickly and easily... |
|
| FPGA-based solution for low-cost ETHERNET Powerlink implementations |
Download/Link |
| Date |
June 2005 |
Word2000
(DOC: 113 kB)
Picture
(JPG: 1,28 MB)
|
| Content |
The new EPL module from IXXAT represents a very successful, fast solution for implementing ETHERNET Powerlink controlled nodes in devices such as drives, I/O modules, encoders etc... |
|
| CAN, FlexRay, ETHERNET Powerlink and more - The new IXXAT catalog |
Download/Link |
| Date |
June 2005 |
Word2000
(DOC: 430 kB)
Picture
(JPG: 403 kB)
|
| Content |
In addition to proven products such as interface cards, analysis tools and protocol software for CAN, the new, expanded IXXAT catalog contains a large number of new products. In addition, an introduction to all areas of technology is given. New topics include ETHERNET Powerlink, EtherNet/IP, SAE J1939 and IEEE 1588 PTP. The catalog can be ordered free of charge from the Internet at www.ixxat.de | Products | Product catalog or downloaded as a PDF file. |
|
| Wireless CAN - CAN access via Bluetooth with CANblue |
Download/Link |
| Date |
April 2005 |
Word2000
(DOC: 36 kB)
Picture
(JPG: 645 kB)
|
| Content |
The CANblue from IXXAT is a universal CAN module enabling wireless communication among CAN systems as well as between a CAN system and a PC with a maximum transmission distance of 100 meters.In addition to the tried and tested PC version of the module, which is supplied with the VCI CAN driver for Windows and enables wireless connection of a Windows PC to the CAN bus, there are now two more versions of the CANblue available to the user... |
|
| CAN Interface for Automotive and Industrial Applications |
Download/Link |
| Date |
April 2005 |
Word2000
(DOC: 36 kB)
Picture
(JPG: 630 kB)
|
| Content |
With the new USB-to-CAN II, IXXAT offers a universal, mobile CAN interface for industrial and automotive applications. The 2-channel interface is available as an industrial version with two high-speed CAN channels and as an automotive version with one high-speed and one high-/low-speed CAN channel switchable via driver software. The CAN controller used is the SJA1000 chip from Philips. Both CAN channels can be galvanically isolated on request. The two CAN connections have an RJ45 socket. Adapters from RJ45 to Sub-D9 are supplied with the design... |
|
| IXXAT - Your partner for successful ETHERNET Powerlink solutions |
Download/Link |
| Date |
February 2005 |
Word2000
(DOC: 35 kB)
|
| Content |
Being the first available Ethernet-based communication system with hard real-time capabilities, ETHERNET Powerlink provides significant advantages for component and system manufacturers, from the integration of standard Ethernet-devices, the high performance of the used software architecture to the diverse possibilities of ETHERNET Powerlink implementation – whether a single-chip solution or if a add-on solution to an already existing CANopen device is preferred... |
|
|
