| CAN repeaters with extended functionality |
Download/Link |
| Date |
December 2006 |
Word2000
(DOC: 35 kB)
Picture
(JPG: 500 kB)
|
| Content |
IXXAT extends its CAN repeater portfolio by two new versions, the CAN-CR200 and the CAN-CR220. Similar to all CAN repeaters from IXXAT, the new models allow setting-up star or tree topologies, the automatic decoupling of defect segments and the galvanic decoupling of the CAN lines against each other and against the power supply... |
|
| New CAN interface for PCI express systems |
Download/Link |
| Date |
December 2006 |
Word2000
(DOC: 35 kB)
Picture
(JPG: 530 kB)
|
| Content |
The new iPC-I XC16/PCIe was specially developed to cover demanding CAN applications like industrial control or automotive test stand.
The interface supports PCI express, and can be easily installed by Plug & Play. Some of the features offered by the on-board 16 bit microcontroller include filtering, pre-processing, low latency, time triggered transmission or high precision time-stamping of CAN messages.The interface can also be used as Master device in CANopen systems with a large number of nodes. The iPC-I XC16/PCIe has two CAN channels and an optional galvanic isolation... |
|
| Industrial Ethernet Module for ETHERNET Powerlink, EtherNet/IP and PROFINET |
Download/Link |
| Date |
September 2006 |
Word2000
(DOC: 38 kB)
Picture
(JPG: 750 kB)
|
| Content |
The new "Industrial Ethernet Module" from IXXAT enables fast, low-cost connection of devices to ETHERNET Powerlink, EtherNet/IP and PROFINET.
The module is based on an Altera-FPGA and contains the CPU (NIOS II), an Ethernet Controller and an integrated 2-port hub, which is routed out via an RJ45 connector.
Depending on the version, the relevant protocol software for the implementation of an ETHERNET Powerlink controlled node, a PROFINET device or an EtherNet/IP adapters is already implemented on the module... |
|
| ETHERNET Powerlink Safety Protocol Software |
Download/Link |
| Date |
September 2006 |
Word2000
(DOC: 37 kB)
|
| Content |
IXXAT offers ETHERNET Powerlink Safety Protocol Software for use in safety-relevant areas, which can be used in conjunction with the IXXAT EPL software as a lower order communication protocol.
The ETHERNET Powerlink Safety protocol software enables the quick and easy development of safety nodes (SN) and Safety Configuration Managers (SCM). The Safety Integrity Level (SIL) which can be achieved by this depends on the hardware architec-ture used. The software was principally designed for use in devices up to and including SIL-3... |
|
| PROFINET protocol software and implementation |
Download/Link |
| Date |
September 2006 |
Word2000
(DOC: 37 kB)
|
| Content |
IXXAT is extending its portfolio and now offers a high quality PROFINET IO development kit.
The development kit enables simple implementation of PROFINET IO devices according to the PROFINET standard and supports real-time (RT) operation. PROFINET RT uses the possibility of prioritization and optimization of the protocol stack to enable high-performance data transmission with standard components of automation technology... |
|
| PCI interface card for ETHERNET Powerlink |
Download/Link |
| Date |
June 2006 |
Word2000
(DOC: 36 kB)
Picture
(JPG: 1 MB)
|
| Content |
In addition to the cPCI card, IXXAT now also offers a PCI card for ETHERNET Powerlink, the EPL-IB-200/PCI.
The card can be used as managing node (MN) and as controlled node (CN) and among other things enables the implementation of realtime-compatible PC-based PLC applications. In addition, the card serves as a platform for PC-based analysis and test systems and can be used with the IXXAT EPL configuration program... |
|
| RoHS-compliant CAN card for ISA systems |
Download/Link |
| Date |
June 2006 |
Word2000
(DOC: 36 kB)
Picture
(JPG: 2.7 MB)
|
| Content |
IXXAT will also offer an ISA PC interface card for CAN and CANopen in future. For this purpose, the iPC-I 165 card from IXXAT was redeveloped in accordance with the RoHS directives and a lead-free version is now available.
For developers of CAN and CANopen systems who for historical reasons or compatibility reasons are still working with ISA bus systems, the iPC-I 165 card therefore represents an alternative available in the long term... |
|
| SAE J1939 extension for the canAnalyser from IXXAT |
Download/Link |
| Date |
March 2006 |
Word2000
(DOC: 37 kB)
Picture
(JPG: 450 kB)
|
| Content |
IXXAT´s canAnalyser is a powerful tool for the development, maintenance and service of CAN systems. The powerful basic functionality of the canAnalyser, for analyzing, stimulation and interpretation can be extended by special modules for CANopen, DeviceNet and latterly J1939 based systems. The new J1939 module displays the received messages according to the SAE J1939 notation. This includes the interpretation of received messages and the extraction of Parameter Group Number, Source Address and transmitted Suspect Parameters with SPN, SP name, value and unit... |
|
|
