email@example.com +46 35 17 29 56
CAN-Ethernet gateway and
The CAN@net II/Generic enables easy and flexible access to
CAN systems via Ethernet. The device provides two operation
modes, a bridge mode and a gateway mode.
In the gateway mode the CAN@net II/Generic is connected to a PC or to a controller platform via TCP/IP. The application program on the host communicates via a standard TCP/IP socket and uses a simple ASCII protocol. As CAN-Ethernet Gateway, the CAN@net II/Generic offers simple, flexible access to CAN systems via a LAN or via the Internet.
Using two CAN@net II/Generic, a CAN-Ethernet-CAN bridge can be implemented. This bridge allows the exchange of CAN messages between two CAN systems via TCP/IP where filter tables can be defined.
Configuration and firmware update
The configuration of the TCP/IP parameters can be performed using a PC tool with automatic device detection. The configuration of the bridge functionality and the CAN communication is supported by an implemented webserver.
REQUEST CALL BACK
Find a Local Distributor