firstname.lastname@example.org +46 35 17 29 56
Configurable CAN-to-CAN Bridge/Router with CAN FD Support
The CANbridge NT is offered in two versions, as CANbridge NT 200 with 2 classic CAN channels and as CANbridge NT 420 with 4 CAN channels, where 2 channels can be switched between CAN and CAN FD.
Both devices allow the easy coupling of CAN (CAN FD) networks, including networks with different bit rates or frame formats (11/29 bit identifier). The bridges/routers have a powerful microcontroller that can perform message filtering, ID translation and data multiplexing (e.g. required for CAN FD to CAN message conversion), at this even bursts at higher data rates can be processed without message loss.
CANbridge NT 200 Manual CANbridge NT 420 Manual
Unlike a CAN Repeater, which only translates the electric signals, the CAN messages are received completely by the CANbridge NT and then sent to the other CAN or CAN FD network in line with existing filter, conversion, port mapping or multiplex rules (Store-Forward principle). By using mapping tables the message reception/transmission is possible between all 4 channels.
With the aid of filter and conversion rules, CAN or CAN FD messages can be filtered or modified. With these mechanism, the bus load can be reduced in the individual networks by only sending messages which are of interest to the other network. Data multiplexing allows the mapping of e.g. CAN FD frame data into several standard CAN messages.
The configuration of the CANbridge NT can be done by using the included Windows-based configuration tool. Using the tool the configuration of filter, mapping, multiplexer or translation rules can be made very easily without programming knowledge.
REQUEST CALL BACK
Find a Local Distributor