email@example.com +46 35 17 29 56
Extensions: NMEA2000 ISO15765-2 Diagnostic CAN Driver & Targets
Software package for the development of J1939 Devices
Cross-platform protocol software in accordance with SAE J1939. Combined with the SAE J1939 CAN driver, the protocol software allows quick and easy development of J1939 devices.
As the user interface is designed as a universal functional interface, the protocol software is simultaneously the basis for extensions such as Diagnostics (SAE J1939/73), NMEA 2000 or ISO 11783 (ISOBUS).
The J1939 protocol software is implemented in ANSI-C and is independent of the CAN controller, CPU and operating system (where available). It is adapted to the hardware via the CAN driver package, which is required in addition.
The user manual, API description and demo applications supplied allow a quick start-up of the SAE J1939 protocol software.
Two versions of the SAE J1939 protocol software are available:
The "single channel" version is optimized for the use of just one software instance (CAN channel) and is therefore very good suited for low end CPUs (8 or 16 bit) with limited memory and only one CAN controller. Requirement for the purchase of the J1939 protocol software is the purchase of the IXXAT J1939 CAN driver (1.02.0350.00TTT).
The "multi-channel" version supports several software instances, whereby each instance can use a different CAN channel as well as all instances can use the same CAN channel (Virtual Mode). Requirement for the purchase of the J1939 protocol software is the purchase of the IXXAT J1939 CAN driver (1.02.0350.00TTT).
(not included in contents of delivery)
REQUEST CALL BACK
Find a Local Distributor