Diagnosis and
Configuration Tools


Tools for physical tests and diagnosis as well as for
system and device configuration.


By Ixxat, emotas and Pyramid Solutions.

Diagnosis and Configuration Tools
HMS_web-icon_diagnostic

Commissioning test

CANcheck – Hand-held tool for easy CAN network test during commissioning, maintenance and troubleshooting.

HMS_web-icon_installers-and-mainteners

Easy device configuration

emotas tools enable easy configuration of CANopen and SAE J1939 devices with a few mouse clicks.

HMS_web-icon_Quickshop

Fast time to market

emotas DeviceDesigner tools simplify the development of devices based on emotas protocol software packages and reduce your time to market.

CANcheck

Installation tester for CAN networks

CANcheck allows users to analyze CAN networks during commissioning, maintenance and helps searching faults. This battery-operated, hand-held device connects to the CAN network to be tested and operates using a clearly-structured menu.

 

 

Order codes: 1.01.0097.00000

CANcheck - Installation Tester for CAN

Features and benefits

  • Cable test with network switched off and operational test with network switched on
  • Wiring test: test of the resistances between all pins of the CAN-connector (assignment in accordance with CiA), providing assessment based on pre-defined threshold values
  • Terminal resistance test: measurement of the resistance between CAN_H and CAN_L
  • Cable length: measurement of cable length via pulse-time delay, cable impedance
  • Measurement of the signal level: absolute and differential signal level listed according to identifier
  • Baud rate detection: detection of baud rate of the tested CAN system
  • Identifier scan: determination of all identifiers transmitted and display of reception frequency
  • CANopen mode: Signal level and reception frequency listed according to node-ID
  • Bus load: measurement of the current bus load of the CAN system
  • Error frames: number of error frames per time unit
  • User’s guide: test instructions before the test, OK or error message after the test, continuation after acknowledgement
  • Multilingual: test instructions in German or English

How it works

The CANcheck is operated by means of a simple menu control via cursor keys and LCD display. Test results can be output via the LCD display or a connected PC. 

For display of the results on a PC, the CANcheck is connected to the PC via a USB port. Results are displayed on the PC via a terminal program. The logging function of the terminal program enables the test results to be either archived in a file or printed out.

Technical specifications

Display 128 x 64 pixels; background light can be switched on or off
Keypad Touch-sensitive keypad with 6 keys
Switch on/off Switch on by pressing any key; switches off automatically after 10 mins.
USB port USB 2.0 (full speed)
CAN interface ISO 11898-2 High-Speed CAN
Power supply 4 x 1.5 V Mignon Battery (AA) or USB
Operating time approximately 24 hrs. with a battery capacity of 2850 mAh
Temperature range  0 ºC ... +50 ºC
Housing and dimensions Sturdy aluminum housing 116 x 160 x 34 mm (W/H/D)

Content of delivery

  • CANcheck installation tester
  • CAN "Y" cable with Sub-D9 plug (2 m)
  • 1-to-1 CAN/Trigger cable
  • USB cable
  • Manual
 

CANcheck case with product 

Order number

1.01.0097.00000 CANcheck - Installation tester for CAN networks

    Related products

Contact us!

Need more information about the product or a quote? We are at your disposal...
Technical Services

Development services and OEM products

From brand-labelling, to HW/SW modification to completely custom designed products.
Industries

One product – many applications

HMS offers flexible solutions for a wide range of industries and applications – from industrial automation to automotive test systems.