VCI V4 Driver Downloads

 

 

Version 4.0.436

for Windows 10 (32/64) / Windows 8 (32/64) / Windows 7 (32/64) / Windows XP SP2

Download area

VCI V3 Treiber-Download

The VCI V4 (Virtual Communication Interface) is the driver interface for IXXAT Interfaces under Windows. Based on the VCI customer specific applications can be developed for communication via CAN, CAN-FD, LIN and Industrial Ethernet (see supported APIs). In addition, with the canAnalyser3 and the CANopen Device Manager powerful and extensible tools are offered.

With the VCI V4 also the IXXAT MiniMon (which was part of the VCI V3) is replaced by the more powerful canAnalyser3 Mini, which simplifies commissioning and testing of CAN networks.

Supported IXXAT CAN Interfaces: 

  • All passive CAN-IB PCIe boards: CAN-IB1xx/*
  • All active CAN-IB PCIe boards: CAN-IB2xx/*
  • All passive CAN-IB PCI boards: CAN-IB3xx/*
  • All active CAN-IB PCI boards: CAN-IB4xx/*
  • All passive CANIB PCIe boards for CAN-FD: CAN-IB5xx/*
  • All active CAN-IB PCIe boards for CAN-FD: CAN-IB6xx/*
  • All active CAN-IB PCI boards for CAN-FD: CAN-IB8xx/*
  • USB-to-CAN V2 (compact / professional / embedded / automotive)
  • USB-to-CAN FD (compact / embedded / automotive)
  • iPC-I XC16/PCI
  • PC-I 04/PCI
  • USB-to-CAN compact
  • USB-to-CAN II
  • CAN@net II/VCI
  • CANblue II
  • CAN@net NT 200 – VCI only for configuration
  • FRC-EP 170
  • FRC-EP 190

Supported IXXAT Multi-Protocol Interfaces: 

  • IXXAT INpact PCIe Slave
  • IXXAT INpact PCIe Mini Slave

NOT supported IXXAT Interfaces:

  • iPC-I 320/PCI II
  • iPC-I XC16/PMC
  • iPC-I XC16/PCIe
  • FR-IB100/PCIe

 

Supported APIs

  • C++ for "classic" CAN and CAN FD
  • C-API
  • .NET API für CAN und CAN FD

 

Currently not supported programming interfaces (APIs):
Please note: Existing software applications that use one of the following APIs (available in VCI V3), can not be used with this VCI V4 version:

  • JAVA
  • Labview
  • VCI V2-API Addon (VCI V2.20)

Support for this APIs will be available shortly.

 

Please note:

  • For Windows 7 an installed SP1 (Service Pack 1) is required for installation of the VCI V4.
  • Under certain circumstances, the PCI card versions are not displayed correctly in the Windows Device Manager after installation. In this case, please run in a command window with administrator rights the command <bcdedit / set {current} PCIexpress forcedisable>. This deactivates the "PCI Express Native Control" and enables the original PCI Express functions. 
  • The VCI-V3 and VCI-V4 programming interface differs from the programming interface of the VCI V2. If you have software, which has been developed for use with the VCI 2.x, for example OEM software, please check whether the software supports the current VCI driver before installing.
FileVersionSizeDownload
VCI 4.0.436.0 Installation - For Windows 10, 8, 7 (32/64) and Windows XP SP2 47.77 MB Download
VCI 4.0.436.0 Installation [Attestation signed] - For Windows 10 (32/64) 1506/1511/1607 with enabled UEFI-BIOS Secure Boot 47.80 MB Download
VCI V4 & V3 Installation Manual 713.16 KB Download
VCI-4 .NET Software Design Guide English 4.47 MB Download
VCI-4 C++ Software Design Guide English 6.24 MB Download
canAnalyser Mini Manual English 498.62 KB Download

Downloads

More