Login
logo

CAN/CAN FD repeater with screw terminals and termination resistor

Ixxat CAN-CR100

Item number 1.01.0210.20000

The Ixxat CAN-CR100 repeater with two CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation. With integrated termination resistors.

Buy product
On this tab

Overview

Datasheet

Features and benefits

  • Robust industrial use

    Designed for industrial environments, meeting high demands for robustness, temperature ranges, and safety.

  • Flexibility in CAN FD network design

    Helps to optimize CAN/CAN FD network structures by enabling extended layouts (stub lines, star and tree topologies).

  • Fast and transparent operation

    Minimal impact on real-time behavior, equivalent to a short line length (ca. 35 m/175 ns delay). Enabling transparent transmission, compatible with all higher layer protocols.

  • Cost savings due to simple wiring

    Optimized topologies enable simpler wiring, resulting in less cables and cost savings at installation and maintenance.

  • Enhanced network reliability

    Higher system reliability by electrically isolating CAN/CAN FD segments and power up to 1 kV. This enhances the protection of the device against damage to electronics caused by voltage peaks.

  • Network monitoring and fault recovery

    In case of disturbances, the repeater automatically disconnects the affected segment and restores it after the fault is resolved.

  • Integrated bus termination resistors

    Integrated bus termination resistors (120 Ohm, switchable via DIP switch) prevent reflections on the line ends and ensure optimum communication.